Along with the years of entrepreneurial journey of Zhongyuan people, she gradually formed her own spiritual pillar and behavioral norms. In the silent inheritance, she guided Zhongyuan Company towards a more brilliant tomorrow.
Spiral seam submerged arc welding steel pipe testing equipment
keyword Spiral seam submerged arc welded steel pipe Category Steel pipe quality Related products Get a quoteSpiral seam submerged arc welding steel pipe testing equipment
| NO. | Equipment name | Quantity | Specification and model | Performance status |
| 1 | X-ray industrial television Phase display system | 6 | XYD-225 | Tube voltage: 150KV/225KV Tube current: Large focus 0-20mA, small focus 0-4mA Maximum penetration capacity: 16mm steel plate Resolution: 18-20LD/cm Edge 20 pairs/cm; Grayscale level:>8 levels Geometric distortion of images:< 3% Inspection speed: 4m/min |
| 2 | X-ray industrial television | 3 | MXR-160/21 | |
| Phase display system | ||||
| 3 | Portable X-ray machine for tube end photography | 18 | 3005 | |
| 4 | Ultrasonic online flaw detection system | 8 | SC-CT2 | Detection frequency: 1.25-5KHz; |
| Signal to Noise Ratio:< 10% | ||||
| Testing method: water film coupling, pulse reflection detection speed: 6m/min | ||||
| 5 | Manual ultrasonic testing equipment | 16 | PXUT-360 | Detection frequency: 1.25-10KHz |
| Horizontal linearity<1%; Vertical linearity<5% | ||||
| Signal to Noise Ratio:< 10% | ||||
| Testing method: Pulse reflection direct testing method | ||||
| 6 | shaper | 1 | B665 | 650×500mm |
| 7 | Horizontal universal lifting milling machine | 1 | X61W | 250×1000mm |
| 8 | Multi purpose grinding machine | 1 | M7130 | 250×600mm |
| 9 | Impact testing machine | 1 | JB-300B | 0-150J 0-300J |
| U=4.0% k=2 | ||||
| From room temperature to -196 ℃ | ||||
| 10 | Electro hydraulic servo universal testing machine | 1 | SHT4106 | The maximum test force is 1000kN, the accuracy level is 0.5, the relative error of the test force indication is within ± 0.5%, the measurement range of the test force is 1% -100% FS, the deformation measurement range is 1% -100% FS, the relative error of the deformation indication is within ± 0.5%, and the deformation resolution is 1/300000 |
| 11 | Electro hydraulic servo universal testing machine | 1 | SHT5106 | |
| 12 | Microcomputer controlled electronic universal testing machine | 1 | CMT5605 | Maximum test force: 600kN; |
| Accuracy level of testing machine: 0.5 level; | ||||
| Test force measurement range: 0.4% -100% FS, no grading throughout the entire process; | ||||
| Relative error of test force indication: within ± 0.5%; | ||||
| Experimental resolution: 1/± 300000 of the maximum experimental force (with constant resolution throughout the entire process); | ||||
| Deformation measurement range: 0.2% -100% FS; | ||||
| Relative error of deformation indication: within ± 0.5% of the indication; Deformation resolution: 1/± 300000 of the maximum deformation amount; | ||||
| 13 | Microcomputer controlled electronic universal testing machine (Metersoft, USA) | 1 | E45.305-ACBT | Type of force sensor: spoke type |
| Rated force value: 300000N | ||||
| Accuracy: Level 0.5, 0.4% -100% | ||||
| Repeatability: ± 0.03% | ||||
| 14 | Drop hammer tear testing machine | 1 | JL30000 | The maximum impact energy is 30000J, the main hammer weight is 560kg, and the weight mass is 30kg per piece, totaling 17 pieces. |
| 15 | Drop hammer tear testing machine | 1 | ZCJ2504 | The maximum impact energy is 50000 J, |
| The main hammer weighs 1180kg and the weight weighs 30kg per piece, totaling 26 pieces. | ||||
| 16 | LCD pendulum impact testing machine | 1 | ZBC2752-2 | The impact energy is 0-450J, 0-750J, and the static linear error of the impact force sensor is ± 1%. The test temperature ranges from room temperature to -75 ℃. |
| 17 | Low temperature tank for impact test | 1 | CDW-65A | Normal temperature, low temperature (-75 ℃) |
| 18 | Low temperature impact tester | 1 | CDW-196 | Temperature control range:+30 ℃~-196 ℃, constant temperature accuracy:< ±2℃ |
| 19 | Photoelectric analytic balance | 1 | TG328A | Maximum load: 200g |
| Division value: 0.1mg | ||||
| 20 | spectrophotometer | 1 | SP-721 | Wavelength range: 325-1000 nm |
| Luminous accuracy ± 1% T. | ||||
| 21 | Direct reading spectrometer | 1 | Spectro M9 | All chemical elements that need to be analyzed in the metal industry can be determined, including carbon (C), phosphorus (P), sulfur (S), especially nitrogen (N) element analysis. Equipped with a complete working curve, suitable for analyzing corresponding substrates (metal substrates), such as: Fe, Al, Cu, Ni, Co,Ti,Mg,Zn,Pb,Sn。 Covering the entire range of elemental analysis, analysis elements can be selected according to specific needs. |
| 22 | Vickers hardness tester | 1 | VH-5 | Hardness range 1-30kg/f |
| 23 | stereomicroscope | 1 | Lmager.A1m | Adopting the world's best infinite distance dual color correction and contrast enhancement (ICCS) optical system, we provide users with the sharpest images. Magnification factor: 50-1000 times, |
| 24 | Zeiss microscope | 1 | AX-10 | Magnification factor: 8-32 times |
| 25 | Corrosion test of metal materials | 1 | corrosion test equipment | HIC SSC SWC |
| 26 | Electronic ultrasonic thickness gauge | 15 | TT110 | Measurable thickness 1.0-225mm |
| 27 | Electronic hook scale | 3 | KGW-50T | The maximum wireless transmission distance is 200m, |
| Stability time less than 3 seconds |
ADD：Chengnan Industrial Development Zone, Yanshan County, Hebei Province
Domestic phone number：0086-317-6689999
International call：0086-317-6165555
E-mail:9905791@qq.com
